DOCUMENT ID:  1053-02

SYNOPSIS:     Support and setup of the Sound Blaster Pro Audio Card

OS RELEASE:   2.x

PRODUCT:      Solaris x86

KEYWORDS:     Sound Blaster Pro Audio Card adapter setup install


DESCRIPTION:

What release supports the Sound Blaster Pro Audio card and what are the
settings. 


SOLUTION:

The Sound Blaster Pro audio card is supported by Solaris x86 to provide
audio capabilities for applications and DeskSet utilities.  The adapter
is shipped with the interrupt line jumpered to IRQ7.  If the system also
has a parallel port labeled LPT1, then an IRQ conflict exists.  The
Sound Blaster Pro must be jumpered to use another IRQ that is not in use
by any other adapter, such as the network adapter.  Use IRQ 2, 5 or 10. 

Note that changing the IRQ number on the Sound Blaster Pro requires the
board to be removed from the system.  Be sure to record the new IRQ
setting, because you will need to assign it to the Sound Blaster Pro
during the device configuration process of the Solaris installation. 


DATE APPROVED: 09/15/95